top of page

Load data for .510 DTC + .51 | 570gr | Swift A-Frame

Recommended Powder(s): none

.510 DTC + .51 | 570gr | Swift A-Frame

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.510 | 570gr | Swift A-Frame
Bullet Weight:
570gr | 36.9g
Bullet Diameter:
0.510" | 12.95mm
Bullet Length:
1.270" | 32.3mm
Caliber:
.510 DTC load data
Case Length (l3):
3.785" | 96.1mm
Cartridge Length (C.O.L.):
5.331" | 135.4mm
Seated Depth:
-0.276" | -7.0mm
Shank Seated Depth:
-0.276" | -7.0mm
Case Capacity:
300.0 Grains of Water | 19.48 cm³
Primer Size:
Large Rifle Magnum (LRM)
Max. allowed Pressure:
52214 psi | 3600 bar
LID:
LID_B10891_C871
Last updated:
2025-02-02

Load data for 36 loads in caliber .510 DTC with .510 | 570gr | Swift A-Frame bullet and 18 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2217
<<locked>>
86%
46963
90%
**57
99%
ADI AR 2218
<<locked>>
90%
46934
90%
**49
96%
ADI AR 2225
<<locked>>
88%
46920
90%
**90
100%
Accurate 8700
<<locked>>
96%
46702
89%
**61
95%
Alliant Reloder-33
<<locked>>
87%
46818
90%
**03
96%
Alliant Reloder-50
<<locked>>
91%
46978
90%
**87
95%
Hodgdon H1000
<<locked>>
86%
46963
90%
**57
99%
Hodgdon Retumbo
<<locked>>
88%
46920
90%
**90
100%
Hodgdon TrailBoss
<<locked>>
97%
36709
70%
**65
100%
IMR 8133 Enduron
<<locked>>
90%
46963
90%
**80
99%
Norma 217
<<locked>>
89%
46920
90%
**80
100%
ReloadSwiss RS 14
<<locked>>
97%
37797
72%
**08
100%
ReloadSwiss RS 80
<<locked>>
84%
46833
90%
**90
98%
SNPE Vectan SP 13
<<locked>>
95%
46891
90%
**35
95%
[Vihtavuori 20N29]*
<<locked>>
96%
46920
90%
**54
93%
[Vihtavuori N170]*
<<locked>>
88%
46862
90%
**95
94%
Vihtavuori N568
<<locked>>
84%
46949
90%
**87
97%
Vihtavuori N570
<<locked>>
85%
46978
90%
**07
95%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2217
<<locked>>
81%
39682
76%
**16
97%
[ADI AR 2218]*
<<locked>>
82%
35607
68%
**70
90%
ADI AR 2225
<<locked>>
81%
37188
71%
**97
99%
[Accurate 8700]*
<<locked>>
88%
35375
68%
**11
90%
[Alliant Reloder-33]*
<<locked>>
81%
38072
73%
**13
92%
[Alliant Reloder-50]*
<<locked>>
82%
35505
68%
**38
90%
Hodgdon H1000
<<locked>>
81%
39682
76%
**16
97%
Hodgdon Retumbo
<<locked>>
81%
37188
71%
**97
99%
Hodgdon TrailBoss
<<locked>>
84%
30603
59%
**40
100%
IMR 8133 Enduron
<<locked>>
81%
34737
67%
**15
95%
Norma 217
<<locked>>
81%
35520
68%
**44
98%
ReloadSwiss RS 14
<<locked>>
81%
30226
58%
**50
100%
ReloadSwiss RS 80
<<locked>>
81%
41669
80%
**85
96%
[SNPE Vectan SP 13]*
<<locked>>
86%
35694
68%
**98
90%
[Vihtavuori 20N29]*
<<locked>>
92%
40538
78%
**23
90%
[Vihtavuori N170]*
<<locked>>
81%
38189
73%
**21
91%
Vihtavuori N568
<<locked>>
81%
42627
82%
**92
96%
[Vihtavuori N570]*
<<locked>>
81%
40915
78%
**82
93%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page